True North Arrows Clear Finish

Description

True North Arrows High Gloss or Satin Clear Finish

Features:

• 100% waterborne technology
• Very low odor and no VOC
• High-gloss finish
• Cleans up with soap & water
• Sold by the Quart

This coating can be used for bow finishes and can be used with a speed coat dipper system. The more coats you apply, the glossier the finish; or ”free dipped” for a faster gloss, but you will have more waste. 

To achieve the proper finish when free dipping arrows, thin the clear coat with water to avoid bubbles and fish eye.

ARROWS WERE FIELD TESTED AND LEFT IN THE WEATHER FOR ONE MONTH WITH NO LIFTING/CHECKING AND FEATHERS INTACT.

Note:  True North Arrows Clear Gloss & Clear Flat Arrow & Bow Finishes are not compatible with dye base stains.

*** PLEASE NOTE***  WHEN USING NEW PRODUCTS LIKE THE TRUE NORTH ARROWS 
ECO-FRIENDLY CRESTING PAINTS-CROWN DIPPING PAINTS- CLEAR ARROW; THERE IS 
A SLIGHT LEARNING CURVE TO THE PRODUCTS. THEY ARE DESIGNED TO BE USED 
SIMILAR  TO THE PRODUCTS OF YESTERYEAR. THESE PRODUCTS ARE THE NEXT 
GENERATION OF FINISHES & DESIGNED FOR THE CONSUMER & PROFESSIONAL

Stir the TRUE NORTH ARROW FINISH GLOSS well, then add to the tube. Product is ready to 
use, pre tinned for your convenience.  Then run an old shaft up and down until the CLEAR 
FINISH flows off with no bubbles, they will pop fast. Leave your self room so if you need to add 
more water so it runs off nicely, dip 2 or 3 times for best results, usually in a few hours 4 to 6  you 
can re dip. You can dip over bare shaft or stain. (just make sure your stain dries 24 hours) LET 
THE LAST CLEAR COAT OVER ALL CRESTING/CROWN DIP SET 16 TO 24 HOURS BEFORE 
FLETCHING.